Pacific AD200-E Acoustic Door Set STC/Rw 40 Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Pacific AD200-E Acoustic Door Set STC/Rw 40
Frame materials available:
- Timber (any species), Pine clear standard
Fasteners:
- Frame - Either nailed (75 x 3.2mm) or screwed (10g x 75mm) at 600mm centres nominal. Two fixings per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JFB100 at 500mm centres may be used.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Folded steel connection plates (as shown) to be supplied with frames.
- Hook onto frame bracing straps and nail or screw to timber studs.
- Frame connection plates either clouts (30 x 2.5mm gib clouts) or screw fixed.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- Not applicable
Frame materials available:
- Timber (any species), Pine clear standard
Fasteners:
- Frame - M8 or M10 'Ramset' Dynabolts at 600mm centres nominal and near hinges. Fixings on or near centre of frame jamb.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Jamb fixing at 600mm centres minimum
- Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
- M12 countersunk masonry screwbolts
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging Gap:
- 0-10mm
Frame materials available:
- Timber (any species), Pine clear standard
Fasteners:
- Frame - Screwed (10g x 50mm self tapping) at 600mm centres nominal. Minimum of one screw per location.
- Frames may also be installed by screw fixing the steel studs to the back of the timber frame during wall construction.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- 0-10mm
Frame materials available:
- Timber (any species), Pine clear standard
Recommended Fasteners:
- Frame - Screwed (10g x 50mm self tapping) at 600mm centres nominal. Minimum of one screw per location. Frames may also be installed by screw fixing the steel studs to the back of the timber frame during wall construction.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame screwed to boxed stud at 600mm centres nominal with self tapping screws.
- Steel studs may be riveted (steel pop rivets) or screwed (9g x 45mm self tapping) to the frame bracing straps at 600mm centres nominal.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- Not applicable
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame screwed to boxed stud at 600mm centres nominal with self tapping screws.
- Steel studs may be riveted (steel pop rivets) or screwed (9g x 45mm self tapping) to the frame bracing straps at 600mm centres nominal.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- Not applicable
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame screwed to boxed studs with packing steel shims at 600mm centres nominal.
- Steel studs may be riveted (steel pop rivets) or screwed (9g x 45mm self tapping) to the frame bracing straps at 600mm centres nominal.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging Gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame screwed to boxed studs with packing steel shims at 600mm centres nominal.
- Steel studs to be screwed (9g x 75mm self tapping) to the frame bracing straps at 600mm centres nominal.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging Gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame screwed to boxed studs with packing steel shims at 600mm centres nominal.
- Steel studs to be screwed (14g x 125mm self tapping) to the frame bracing straps at 600mm centres nominal.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging Gap:
- 0-10mm
