Non Fire Rated Interconnecting Doors

Pacific Doors offer a range of interconnecting door sets that provide a higher acoustic performance than a single door set can provide.

These door sets are tested acoustic interconnecting door sets designed to reduce sound transmission within buildings.

These door sets are hinged flush panel door sets that are suitable for interior use. They are currently available with single door leafs only.

The thickness of each door leaf is 47mm with an approximate leaf weight of 24kg/m²

Door Type	Frame Type	Space Description	Acoustic Rating	Max Leaf Height (mm)	Max Leaf Width (mm)
AD200-48ID	Common Frame	65mm airspace between the door leafs	STC/Rw 48	2700	1200
AD200-58ID	Separate Frame	160mm airspace between door leafs	STC/Rw 58	2700	1200
AD300-ID	Separate Frame	160mm airspace between door leafs	STC/Rw 61	2700	1200

Notes:

1. Please note that the maximum leaf width shown above is measured per door leaf.

Common Frame

Separate Frame

Seals

The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed.

The bottom seal (Type L) is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door.

The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.

Hardware

These door sets require suitable latching in order for the frame seals to fully seal the gap between door leaf and frame. When installed in a common frame, the spacing between the door leaves must be considered when selecting door furniture.

Practically any standard door hardware can be used on these door sets, however the proposed hardware must be advised to Pacific Door Systems Ltd to assess the suitability, before manufacture.

Product Options

Leaf Facings

The facings listed below are available for these door sets

• MDF
• Timber Veneer
• HPL decorative laminate (e.g. Formica)

Notes:

1. Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

Paint-quality doors have unclashed edges.

Timber veneer faced doors are clashed on the vertical edges with solid timber.

 

Frame Types & Profiles

Timber Frame

The timber frame profiles listed below are available for theses door sets

    

Steel Frame

The steel frame profiles listed below are available for theses door sets

Steel frames require packing of the frame during installation with fibrous insulation material (e.g. fibreglass, mineral wool or polyester batts).

Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

This door set is not available as a pair.

Wall Types

Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.

Product Optional Extras

Technical Compliance Statement

Complete door sets are tested to ISO 140-3 in a purpose-built facility that meets the requirements of  ISO 140-1.