Pacific AFD300 Acoustic Door Set STC/Rw 40

The AFD300 is a tested Acoustic door set which also complies with the Fire Resistance requirements of NZS 4520, as referenced in the New Zealand Building Code (C/AS1 Appendix C 6.1.1).

The AFD300 is a hinged single or pair leaf flush panel door leaf hung in a timber frame. It includes frame-mounted perimeter seals and an automatic bottom seal. It's intended for interior installation only.

The thickness of the AFD300 door leaf is 47mm with an approximate leaf weight of 26kg/m²

The AFD300 with its composite construction to achieve fire and acoustic performance will not exhibit a perfectly straight or flat surface. It may have undulations in the door face of +/- 10mm.

Wall Type	Fire Resistance Rating Stability/Integrity/Insulation	Door Application	STC/Rw Rating	Max Leaf Height (mm)	Max Leaf Width (mm)
Timber Stud Wall Masonry Wall	-/60/60sm	Single	40	2400	1200
		Pair	38	2100	910

Notes:

1. Please note that the maximum leaf width shown above is measured per door leaf.
2. The ‘sm’ above denotes that the door is available as a smoke control door set.
3. Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.

Seals

The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed.

The bottom seal is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door.

The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.

Hardware

A range of common commercial hardware has been fire tested with the AFD300 door set.

Hardware can be fixed to the door using standard fasteners. The door leaf does not have a solid core so fixing is into the door facings (11mm thick).

Pull handles and door holders must be through-fastened.

Concealed hinges are not an option on this doorset.

 

Product Options

Leaf Facings

The facings listed below are available for the AFD300 door set

• MDF
• Timber Veneer

Notes:

1. Of the above facings only those marked * may extend around the door edge.
2. Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

All doors are clashed on the vertical edges with solid timber.

Frame Types & Profiles

Timber Frame

The timber frame profiles listed below are available for the AFD300 door set. Frame material is hardwood of minimum density 650 kg/m³.

    

Steel Frame

The AFD300 is currently not available in a steel frame.

Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. Timber sills are not available on fire doorsets. For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

 

Wall Types

Fire rated walls must be to at least the minimum specification for the fire resistance required.

Product Optional Extras

Building Product Information Statement