Pacific F0.5 Door Set -/30/30sm Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Pacific F0.5 Door Set -/30/30sm
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard
Fasteners:
- Frame - either nailed (75x3.2mm) or screwed (10gx75mm) at 600mm centres. Two nails or screws per location.
- Stops - nailed (50x3.2mm) at 200mm centres.
- Architrave - nailed (50x3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JBF100 at 500mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Ex 75x50mm minimum
Wedging gap:
- 0-6mm
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard thicknesses are 30mm or 42mm)
Fasteners:
- Frame - either nailed (75x3.2mm) or screwed (10gx75mm) at 600mm centres. Two nails or screws per location.
- Stops - nailed (50x3.2mm) at 200mm centres.
- Architrave - nailed (50x3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JBF100 at 500mm centres.
Stud size:
- ex 75x50mm minimum
Wedging gap:
- 0-6mm
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard thicknesses are 30mm or 42mm)
Fasteners:
- Frame - either nailed (75x3.2mm) or screwed (10gx75mm) at 600mm centres. Two nails or screws per location.
- Stops - nailed (50x3.2mm) at 200mm centres.
- Architrave - nailed (50x3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Ex 75x50mm minimum
Wedging gap:
- 0-6mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanised - 1.6mm
Fasteners:
- Folded steel connection plates (as shown) to be supplied with frames.
- Hook onto frame bracing straps and nail or screw to timber studs.
- Frame connection plates either clouts (30 x 2.5mm gib clouts) or screw fixed.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Stud size:
- Ex 75x50 minimum
Wedging Gap:
- Not applicable
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard thicknesses are 30mm or 42mm)
Fasteners:
- Frame - M8 'Ramset' Dynabolts at 600mm centres nominal.
- Stops - nailed (50x3.2mm) at 200mm centres.
- Architrave - nailed (50x3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required.
- Paired door - single central fastener required.
Wedging gap:
- 0-6mm.
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
Fasteners:
- Countersunk anchor method - Jamb fixings at 600mm centres nominal: M10 expansion anchors eg Dynabolt D10102F (as shown) or M12 masonry screwbolts. The length of bolts MUST be confirmed on site to suit the frame openings formed.
Head Fixing (minimum):
- Single door - none required.
- Paired door - single central fastener required.
Wedging Gap:
- 0-15mm
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard thicknesses are 30mm or 42mm)
Fasteners:
- Frame - either nailed (75x3.2mm) or screwed (10gx75mm) at 600mm centres. Two nails or screws per location.
- Stops - nailed (50x3.2mm) at 200mm centres.
- Architrave - nailed 50x3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JBF100 at 500mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Steel stud minimum 63mm, timber stud to match
Wedging gap:
- 0-6mm
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard thicknesses are 30mm or 42mm)
Fasteners:
- Frame - either nailed (75x3.2mm) or screwed (10gx75mm) at 600mm centres. Two nails or screws per location.
- Stops - nailed (50x3.2mm) at 200mm centres.
- Architrave - nailed (50x3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JBF100 at 500mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Steel stud minimum 63mm, timber stud to match
Wedging gap:
- 0-6mm
Frame materials available:
- Radiata pine or denser, minimum 30mm thick (standard thicknesses are 30mm or 42mm)
Fasteners:
- Frame - either nailed (75x3.2mm) or screwed (10gx75mm) at 600mm centres. Two nails or screws per location.
- Stops - nailed (50x3.2mm) at 200mm centres. Architrave - nailed 50x3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JBF100 at 500mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Steel stud minimum 63mm, timber stud to match
Wedging gap:
- 0-6mm
