Pacific VP30HR Hinged Door Set -/30/30sm

 

The VP30HR is a Pyropanel FR board Maxi door.

The VP30 Heritage door set is designed to replicate traditional rail and stile timber door construction with the appearance of recessed flat or raised panels and timber bolection mouldings. Timber veneers are used to replicate clear finish timber rails and stiles.

The Pacific VP30 Heritage is a side hung fire door set. The VP30 Heritage door set can be single leaf or pair, hung in a timber frame. The frame may include adjacent sidelights or overlights, which may also include decorative timber features.

Timber-framed smoke control doors include a seal in the frame. If required, bottom seals can be selected from the Hardware List.

The thickness of the VP30HR door leaf is 65mm with an approximate leaf weight of 35kg/m2

 Wall Type Fire Resistance Rating
Stability/Integrity/Insulation
Door Application Max Leaf
Height (mm)
Max Leaf
Width (mm)
Steel Stud Wall
Timber Stud Wall
Masonry Wall
 -/30/30sm Single 2300 1020
Pair 2300 1020

Notes:

  1. Please note that the maximum leaf width shown above is measured per door leaf.
  2. The ‘sm’ above denotes that the door is available as a smoke control door set.
  3. Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.

Heritage Fire Doors

Product Options

Leaf Facings

  • MDF
  • Timber Veneers
  • Decorative Timber Mouldings
  • Fire Rated Formica
  • Bollection Panels
  • Plywood #
  • Raised Panels

Notes:

  1. Of the above facings only those marked * may extend around the door edge.
  2. Steel frames are required where metal capping is used.
  3. Timber veneer requires FRR -/30/30
  4. Standard Paint Quality doors are allowed ‘non-clashed’ to provide best surface for finish painting.
  5. Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

The leaf edges listed below are available for the VP30HR door set

Paint quality doors are non-clashed as standard.

  

Frame Types & Profiles

Timber Frame

The timber frame profiles listed below are available for the VP30HR door set.

The timber species of the frame must be pine or denser (500kg/m3)

Steel Frame

The VP30HR is not available in a steel frame. Please view the VP60HR for a steel framed 30 minute fire door set.

Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. Timber sills are not available on fire doorsets. For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

Wall Types

Jambs may be connected to timber stud, steel stud or concrete masonry.
The minimum specification for each wall type is:

  • Precast concrete (100mm thickness) or grouted blockwork (140mm thickness).
  • Non-load bearing timber stud partitions of minimum lining thickness of 10mm Fyreline Gib Board® in accordance with GBT30 (Gib ® Fire Rated Systems).
  • Non-load bearing steel stud partitions of minimum specification GBS60 (Gib® Fire Rated Systems).

Product Optional Extras

Vision Panels

Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR with Vision Panel
Timber Aluminum Up to 0.065m2 Over 0.065m2
Pyrobel* 0.972m2 1800 540   -/30/30 -/30/30
Firelite 0.884m2 1300 680   -/30/30 -/30/-
Georgian Wired 0.32m2 850 770   -/30/30 -/30/-
Robax 0.32m2 850 770   -/30/30 -/30/-
Pyran* 0.32m2 850 770   -/30/30 -/30/-

Notes:

  1. Please note that the height and width of the vision panel must still fall within the maximum glazed area.
  2. A maximum of two vision panels are permitted per leaf.
  3. Glazing types marked with * indicate Grade A Safety glass.
  4. Pyrobel is not suitable for exterior doors.

The VP30HR has the largest vision panel options of all our timber fire doors. Please refer to the Forster Glazed section for larger options.

Standard Vision Panel Cross Sections

Timber Bead

Aluminium Bead

Not applicable for this door set.

Sidelights and Overlights

Timber Frame - Insulated Sidelights and Overlights

Restrictions

Maximum height of overall unit is 4275mm.

The insulated glazing types shown below maybe used for this configuration.

  • Pyrobel - clear pane maximum 2010h x 1300w

This sidelight and overlight configuration is available for single and paired door sets.

Timber Frame - Uninsulated Sidelights and Overlights

Restrictions

Maximum height of overall unit is 3400mm.

The uninsulated glazing types shown below maybe used for this configuration.

  • Firelite - clear pane maximum 1500h x 900w
  • Georgian Wired - clear pane maximum 1000h x 590w

This sidelight and overlight configuration is available for single and paired door sets.

 

Overpanels

Screw fixed side panels or overpanels may be fitted adjacent. Please contact Pacific Doors to get more information on this option.

Additional Door Options

Push or Kickplates

Push plates or kickplates can be of the below permitted materials and can be either surface mounted or recessed flush. Fixing may be via screws or contact adhesive only.

  • Steel (mild or Stainless)
  • Vinyl Sheets up to 2mm
  • Formica
  • Acrovyn
  • Korogard

The maximum height of non-Fire Rated Formica kickplates is 685mm.

Thermal Insulation

This door leaf has a thermal insulation rating (R-value) of 0.645 Km2/W.

Building Product Information Statement