Pacific 3UE-X Hinged Door Set Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Pacific 3UE-X Hinged Door Set
WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
Fasteners:
- Jamb fixings at 600mm centres nominal
- Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
- M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)
Head Fixing (minimum):
- Single door - none required.
- Paired door - single central fastener required.
Wedging Gap:
- 0-10mm
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
Fasteners:
- Jamb fixings at 600mm centres nominal
- Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
- M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)
Head Fixing (minimum):
- Single door - none required.
- Paired door - single central fastener required.
Wedging Gap:
- 0-10mm
