The Pacific SPS3 Reinforced Security door set is suitable for commercial interiors where resistance to physical attack is required from a door with the appearance of a standard interior door.
Product features:
Typical applications:
Not suitable for protection against sophisticated forced entry.
The door set is suitable for interior use only.
Rating | Standard | Description | |
Bullet Resistance | S0 | AS/NZ 2343 | Shotgun 12 gauge SG shot |
The thickness of the SPS3 door leaf is 50mm with an approximate leaf weight of 60kg/m2
Wall Type | Fire Resistance Rating (FRR) | Door Application | Max Leaf Height (mm) | Max Leaf Width (mm) |
Timber Stud Masonry | Not applicable | Single | 2400 | 1200 |
Pair | 2400 | 1200 |
Notes:
Available options include:
The leaf edges listed below are available for the SPS3 door set
The meeting stiles listed below are applicable to paired door sets only.
Stainless steel button tipped Ball Bearing hinges 4 per leaf. Full mortise installation.
The SPS3 door set is suitable for installation of any security or architectural hardware. Hardware must be specified at time of order to enable correct preparation
This door set is only available in a steel frame.
The steel frame profiles listed below are available for the SPS3 door set
Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. For more in depth information on frame profiles and sizes, please see our Installation Instructions.
Glazing Type | Maximum Glazed Area | Max Height (mm) | Max Width (mm) | Glazing Bead | |
Per VP | Total | Steel Bead | |||
Security Glazing | 0.8325m2 | 1.665m2 | 925 | 900 | √ |
The standard glazing system provides a flush attack face and steel beading with fixings on the “non-attack” face. Glazing with ballistic rating G2 is available.
The SPS3 door set has been successfully tested to AS/NZS 2343:1997 “Bullet-resistant panels and elements” with a rating of S0.
Thermal insulation
This door leaf has a thermal insulation rating (R-value) of 0.502 Km2/W.
Kickplates are not generally required on this door set.
Optional, stainless steel mesh inserted into the door core and faced each side with louvre grilles (maximum 200x200mm). Not available for smoke control.
Secure overpanels are available for this door set. Please contact Pacific Doors to discuss your project requirements.
Secure sidelights and overlights are available for this door set. Please contact Pacific Doors to discuss your project requirements.