Pacific SPS1-E Exterior Security Fire Door Set
The Pacific SPS1-E door set is a detention or commercial security door, resistant to physical attack using hand tools, levers and battering rams from either face. The SPS1-E includes features designed to increase impact resistance and durability in high-use situations. The door leaf is a reinforced solid core panel, fully encapsulated in steel sheet with seam-welded edges, hung in a steel frame.
Product features:
- 90min fire rating
- Single leaf
- 2 frame options
- Security tested
- Ventilation grilles available for non-fire rated only
- Optional food hatch available
- Suitable for both interior and exterior use
- Compatible with timber stud and masonry wall
- Meets NZS4520.2010 standard
Applications:
- Institutional Detention door set
- Prison Wing Door
Product Options
The door set is suitable for both interior and exterior use.
The thickness of the SPS1-E door leaf is 50mm with an approximate leaf weight of 80kg/m2
Wall Type Fire Resistance Rating (FRR) Door Application Max Leaf
Height (mm)Max Leaf
Width (mm)Timber Stud *3
Masonry-/90/60 (sm) Single 2350 1150 Notes:
- Please note that the maximum leaf width shown above is measured per door leaf.
- The ‘sm’ above denotes that the door is available as a smoke control door set.
- An SPS1-E installed into a Timber Stud wall will not be fire rated.
FRR Door Set
The SPS1-E fire rated door set can only be installed fully grouted into a concrete/masonry wall opening.
Non FRR Door Set
Timber stud walls
A timber stud subframe can be factory fitted to the main frame for connection to a timber stud security wall.
Masonry walls
Frames may be installed during or after construction of masonry walls. Several proven connection systems are available.
Leaf Facings
The SPS1-E is fully encapsulated in steel sheet.
Leaf Edges
The SPS1-E has seam welded edges as shown below
Meeting Stile
This door set is not available as a pair.
Timber Frame
This door set is only available in a steel frame.
Steel Frame
The steel frame profiles listed below are available for the SPS1-E door set
Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. Timber sills are not available on fire doorsets. For more in depth information on frame profiles and sizes, please see our Installation Instructions.
Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR with Vision Panel Per VP Total Steel Bead Up to 0.065m2 Over 0.065m2 Firelam 0.091m2 0.182m2 700 700 √ -/90/60 -/90/- Notes:
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- This glazing is fire glazing, not security glazing. For apertures more than 200 mm wide we recommend steel bars for security
- Mass of door leaf not to exceed 36 kg / hinge
The standard glazing system provides a flush attack face and steel beading fixed via tamper resistant screws on the inside face.
Standard Vision Panel Cross Sections
Steel Bead
Security Testing
The SPS1-E door set was subjected to 30 impacts from an SPS1 door leaf (weighing 110kg) at 4.8m/s, in the direction of opening of the door. This was intended to simulate using another door leaf as a battering ram. The door remained in its frame and locked at the end of the test, with paneling damaged but not broken.
Thermal Insulation
This door leaf has a thermal insulation rating (R-value) of 0.616 Km2/W.
Hinges
Full mortise 4½” x 4½“ Institutional Hinges are standard (material is Stainless Steel 304).
The SPS1-E can also be installed on block hinges, for example as a cell door in a cast-in cell front. This option is not fire rated.
Pacific Doors also has its own designed and tested block hinge avaiable on request. This option is not fire rated.
Locks and Accessories
The leaf is solid core and therefore most surface mounted or mortised devices can be connected to it such as:
- Mortise, cylinder or surface mounted locks
- Frame-mounted locks
- Door position or lock status switches
- Flush or surface mounted handles
- Power cable ducts
A wide range of electronic locks may be accommodated including electromagnet clamps, shearlocks, and electric strikes.
Multipoint Locking
Locking systems with multiple bolts including top and bottom bolts, internally fitted to the SPS1-E door set, are available from Pacific Door Systems.
Fire-rated SPS1-E hardware
The fire-rated SPS1-E may be fitted with a range of security hardware, including locks with steel components, any closers, pull handles and minor items of hardware provided they are non-combustible and fixed with steel fasteners. Note that fitting of deadlocks and other non-self-latching hardware will make the door set non-compliant in respect to the standard NZS 4520 Fire-resistant door sets.
Product Optional Extras
Push or Kickplates
Kickplates are not generally required on this door set.
Ventilation Grilles
Optional, stainless steel mesh inserted into the door core and faced each side with louvre grilles (maximum 200x200mm). Not available for fire-rated SPS1-E.
Food Hatch
A hinged, latching food hatch may be fitted to suit clients' requirements. Not available for fire-rated SPS1-E.
Hold-open device
The door has a maximum hold-open angle of 180o. Electromagnet clamps are standard hold-open devices.
Power Transfer Devices
Fully mortised devices, which fully conceal cables, are recommended (such as Von Duprin EPT-218). Hinges with integral wiring are also available.
Overpanels are not applicable for this door set.
