Pacific VP60DA Premium Fire Door
The VP60DA is a pivoted double action (double swing) fire door set that is hung in a steel frame. This door set offers a wide variety of leaf facings, glazing and hardware options.
Product features:
- 60min fire rating
- Single or pair
- 8 facing options
- 1 frame option
- 5 glass options
- Compatible with timber stud, steel stud and masonry wall
- Meets NZS4520.2010 standard
Product Options
The VP60DA is a Pyropanel FR Maxi board door.
Pacific Double Action door sets are 180° pivoting doors suitable for interior installation only. The door set configuration may be single leaf or pair, finished with a variety of facings and pivoted in a steel frame.
Bottom seals are not available with this door type.
The thickness of the VP60DA door leaf is 48mm with an approximate leaf weight of 35kg/m2
Wall Type Jamb Type Fire Resistance Rating
Stability/Integrity/InsulationDoor Application Max Leaf
Height (mm)Min Leaf
Width (mm)Max Leaf
Width (mm)Timber Stud Wall
Masonry WallSteel -/60/60sm Single or Pair 2650 490 1075 Single or Pair 2400 490 1200 Notes:
- Please note that the maximum leaf width shown above is measured per door leaf.
- Insulation ratings must be notified at time of pricing for steel frames.
- Please see the below detail for smoke control
Wall Types
Jambs may be connected to timber stud, steel stud or concrete/masonry walls.
The minimum specification for each wall type is:- Precast concrete (150mm thickness minimum) or grouted blockwork (140mm thickness minimum).
- Non-load bearing steel stud partitions of minimum specifications GBS60 (for VP30-DA) or GBS90 (for VP60-DA). Note that 100mm nom. wall framing is necessary where fitting of the head spring hardware is specified.
- Non-load bearing timber stud partitions of minimum specifications GBT30 (for VP30-DA) or GBT60b (for VP60-DA) or GBT90 (for VP90-DA) (as listed in “Gib® Fire Rated Systems”), all based on minimum 100x50mm framing. Note that minimum 100mm nom. wall framing is necessary where fitting of head spring hardware is specified.
Leaf Facings
- Plywood
- Timber Veneers
- Steel – mild or stainless (0.6 – 0.9mm)
- Aluminium sheet (0.3 – 1mm) *
- Decorative Timber mouldings
- MDF
- Hardboard
- High pressure laminate
up to 1.5mm thick (e.g. Laminex, Formica)
Notes:
- Door comes clashed with aluminium bullnose section to enable the double action movement.
- Paint Quality and veneered doors will have visible phenolic stud heads near the top and bottom of both leaf faces
- Timber veneer requires FRR -/60/60 and is only available with a grouted steel frame
- See Additional Door Options for more facing alternatives.
Leaf Edges
The leaf edges listed below are available for the VP60DA door set
Meeting Stile
The meeting stiles listed below are applicable to paired door sets only.
Timber Frame
The VP60-DA is not available in a timber frame.
Steel Frame
The steel frame profiles listed below are available for the VP60DA door set.
Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. Timber sills are not available on fire doorsets. For more in depth information on frame profiles and sizes, please see our Installation Instructions.
Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR with Vision Panel Timber Aluminum Up to 0.065m2 Over 0.065m2 Pyrobel * 0.96m2 (3) 1630 860 √ √ -/60/60 -/60/30 Georgian Wired 0.32m2 850 950 √ -/60/60 -/60/- Firelite 0.32m2 850 950 √ -/60/60 -/60/- Robax 0.32m2 850 950 √ -/60/60 -/60/- Pyran * 0.32m2 850 950 √ -/60/60 -/60/- Notes:
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- A maximum of two vision panels are permitted per leaf.
- Glazing types marked with * indicate Grade A Safety glass.
- Maximum 0.6 m2 per pane
Glazing details for Pyrobel glazed vision panels
Glazing Details for Other Glazing Types
Standard Vision Panel Cross Sections
Timber Bead* Aluminium Bead 
*Pyrobel onlyThermal insulation
This door leaf has a thermal insulation rating (R-value) of 0.645 Km2/W.
Product Optional Extras
Push or Kickplates
Push plates or kickplates can be of the below permitted materials and can be either surface mounted or recessed flush. Fixing may be via screws or contact adhesive only.
- Steel
- Acrovyn
Restaurant Function
A modified door set allowing two door leaves to open 90o in opposite directions and closing onto short header-fixed stops is available.
Excessive Frame Gaps
Standard gap between leaf edge and frame is 3-4 mm. Gaps between 4-10 mm can be made compliant by inclusion of an intumescent seal in the frame scallop.
Decorative Panels
decorative panels (stone, glass, MDF, plasterboard, hardboard or greenboard) can be added to one face of the door leaf provided:
• Panel is glue fixed (no screws or nails)
• Additional weight is less than 20 kg per hinge
• Leaf dimensions are 2400 x 1020 or less
• Leaf is hung in a steel framePanels to be installed on site by others. They can be either glued directly to the face of the leaf or onto timber battens glued to the leaf.
Decorative panels are not allowed in conjunction with vision panels.
Smoke Control
If a smoke control rating is required, the top edge seal is a Lorient LAS3004si silicone fin seal face mounted to the top of one leaf face.
Overpanels with transom are available to an overall height of 3600mm.
Pair:
Single:
Steel Transom Overpanel Detail
Sidelights and Overlights are not applicable to this door set. Please contact Pacific Doors to discuss your requirements.
