Non Fire Rated Interconnecting
Pacific Doors offer a range of interconnecting door sets that provide a higher acoustic performance than a single door set can provide. These door sets are tested acoustic interconnecting door sets designed to reduce sound transmission within buildings.
Product features:
- Upto STC 61 acoustic rating
- Single leaf only
- 6 frame options
- Suitable for interior use only
- Compatible with timber stud, steel stud and masonry wall
- Certified acoustic performance to ISO 140-3
Product Options
The thickness of each door leaf is 47mm with an approximate leaf weight of 24kg/m2
Door Type Frame Type Space Description Acoustic Rating Max Leaf
Height (mm)Max Leaf
Width (mm)AD200-48ID Common Frame 65mm airspace between the door leafs STC/Rw 48 2700 1200 AD200-58ID Separate Frame 160mm airspace between door leafs STC/Rw 58 2700 1200 AD300-ID Separate Frame 160mm airspace between door leafs STC/Rw 61 2700 1200 Notes:
- Please note that the maximum leaf width shown above is measured per door leaf.
Common Frame
Separate Frame
Wall Types
Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.
Leaf Facings
The facings listed below are available for these door sets
- MDF
- Timber Veneer
- HPL decorative laminate (e.g. Formica)
Notes:
- Other facings may be available, please contact Pacific Doors to discuss further options.
Leaf Edges
Paint-quality doors have unclashed edges.
Timber veneer faced doors are clashed on the vertical edges with solid timber.
Meeting Stiles
This door set is not available as a pair.
Seal
The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed.
The bottom seal (Type L) is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door.
The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.
Timber Frame
The timber frame profiles listed below are available for theses door sets
Steel Frame
The steel frame profiles listed below are available for theses door sets
Steel frames require packing of the frame during installation with fibrous insulation material (e.g. fibreglass, mineral wool or polyester batts).
Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. For more in depth information on frame profiles and sizes, please see our Installation Instructions.
Vision panels are not permitted on these door sets.
AD200-48ID:
AD200-58ID:
AD300-ID:
Product Optional Extras
Push or Kickplates
Kickplates of any kind can be surface mounted to this door set.
Overpanels are not an option on this door set as it would impact the acoustic performance of the door set.
Sidelights and ovelights are not an option on these door sets as it would impact the acoustic performance of the door set.