Fire Rated Interconnecting Doors Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Fire Rated Interconnecting Doors
Frame materials available:
- Hardwood timber - Min. density 580kg/m≥ (minimum thickness is 30mm)
Fasteners:
- Frame - Either nailed (75 x 3.2mm) or screwed (10g x 75mm) at 600mm centres nominal. Two fixings per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JFB100 at 500mm centres may be used to fix profiles A & B to approved walls.
Stud size:
- Ex 100 x 50 minimum.
Wedging gap:
- 0-10mm
Frame materials available:
- Hardwood timber - Min. density 580kg/m≥ (minimum thickness is 30mm)
Fasteners:
- Frame - Either nailed (75 x 3.2mm) or screwed (10g x 75mm) at 600mm centres nominal. Two fixings per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets Type JFB100 at 500mm centres may be used to fix to approved walls.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Ex100 x 50 minimum.
Wedging gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame to be screw fixed (10g self tapping) at 600mm centres nominal. Two fasteners per location where applicable.
Head Fixing (minimum)
- Single door - none required
- Paired door - single central fixing required
Stud Size:
- Ex 100 x50 minimum
Wedging gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame to be screw fixed (10g self tapping) at 600mm centres nominal. Two fasteners per location where applicable.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Stud size:
- Ex 100x50 minimum.
Wedging gap:
- 0-10mm
Frame materials available:
- Hardwood timber - Min. density 580kg/m≥ (minimum thickness is 30mm)
Fasteners:
- Frame - M8 or M10 'Ramset' Dynabolts at 600mm centres nominal. Fixings on or near centre of frame jamb.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging gap:
- 0-15mm
Frame materials available:
- Hardwood timber - Min. density 580kg/m≥ (minimum thickness is 30mm)
Fasteners:
- Frame - M8 or M10 'Ramset' Dynabolts at 600mm centres nominal. Fixings on or near centre of frame jamb.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging gap:
- 0-15mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Jamb fixing at 600mm centres nominal
- Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
- M12 countersunk masonry screwbolts
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Jamb fixing at 600mm centres nominal
- Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
- M12 countersunk masonry screwbolts
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging Gap:
- 0-10mm
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
- Stainless Steel - 1.5mm
Fasteners:
- Frame screwed to boxed stud at 600mm centres nominal with self tapping screws.
- Steel studs may be riveted (steel pop rivets) or screwed (9g x 45mm self tapping) to the frame bracing straps.
Head Fixing (minimum):
- Single Door - none required
- Paired door - single central fastener required
Stud size:
92 x 34mm minimum of 0.55 SMG gauge
Wedging gap:
- 0-10mm
