Pacific AFD300 Acoustic Door Set STC/Rw 40 Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Pacific AFD300 Acoustic Door Set STC/Rw 40
Frame materials available:
- Hardwood timber - Min density 650kg/m3
- 42 mm or 30 mm timber jamb thickness
Fasteners:
- Frame - Either nailed (75 x3.2mm) or screwed (10g x 75mm) at 60mm centres nominal. Two fixings per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets type JFB100 at 500mm centres may be used.
Head Fixing
- Single door - none required.
- Paired door - double central fastener required.
Stud Size
- Stud to suit acoustic wall system of equal or greater rating required.
Wedging gap:
- 0-10mm
Frame materials available:
- Hardwood timber - Min density 650kg/m3
- 42 mm or 30 mm timber jamb thickness
Fasteners:
- Frame - Either nailed (75 x3.2mm) or screwed (10g x 75mm) at 60mm centres nominal. Two fixings per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets type JFB100 at 500mm centres may be used.
Head Fixing
- Single door - none required.
- Paired door - double central fastener required.
Stud Size
- Stud to suit acoustic wall system of equal or greater rating required.
Wedging gap:
- 0-10mm
Frame materials available:
- Hardwood timber - Min density 650kg/m3
- 42 mm or 30 mm timber jamb thickness
Fasteners:
- Frame - Either nailed (75 x3.2mm) or screwed (10g x 75mm) at 60mm centres nominal. Two fixings per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
- Pryda Jamb-fixa brackets type JFB100 at 500mm centres may be used.
Head Fixing
- Single door - none required.
- Paired door - double central fastener required.
Stud Size
- Stud to suit acoustic wall system of equal or greater rating required.
Wedging gap:
- 0-10mm
Frame materials available:
- Hardwood timber - Min density 650kg/m3
- 42 mm or 30 mm timber jamb thickness
Fasteners:
- Frame - M8 or M10 'Ramset' Dynabolts at 600mm centres nominal and near hinges. Fixings on or near centre of frame jamb.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing
- Single door - none required.
- Paired door - single central fastener required.
Wedging gap:
- 0-10mm
