Pacific AD500 Acoustic Door Set STC/RW 50 Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Pacific AD500 Acoustic Door Set STC/RW 50
WALL TYPE: Timber stud
FRAME TYPE: Timber
Frame materials available:
- Radiata Pine
- Hardwood timber
Fasteners:
- Frame to be screw fixed at 400mm centres nominal. Two fixings per location (10g x 75mm and 14g x 125mm)
- Architraves optional
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- 0-10mm
WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part
Frame materials available:
- EGZ - 2.0mm
- Cold-rolled galvanised - 2.0mm
Fasteners:
- Frame to be screw fixed at 400mm centres nominal. Two fixings per location (10g x 75mm and 14g x 125mm)
- Architraves optional
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Stud to suit acoustic wall system of equal or greater rating required
Wedging gap:
- 0-10mm
